![Slitting lines SLL Slitting Lines FLOREANI & PARTNERS New [#3279]](Slitting-line-new-main.jpg "Slitting lines SLL Slitting Lines FLOREANI & PARTNERS New [#3279] Slitting lines SLL")
1
New Slitting Lines
REQUEST QUOTATION
FLOREANI & PARTNERS
For quotations of new Slitting Lines we require at least this information:
1. Type of Material(s)
2. Maximum Tensile Strength at what Material Thickness
3. Maximum Yield at Max. Material Thickness
4. Entry & Exit Coil Max. Weight
5. (for each Type of Material) Minimum Material Thickness
6. (for each Type of Material) Maximum Material Thickness
7. Minimum / Maximum Entry Coil Width
8. Minimum / Maximum Entry Coil ID
9. Minimum / Maximum Exit Coil ID
10. Maximum Entry Coil OD
11. Maximum Exit Coil OD
12. Minimum Slit Width
13. (for each Type of Material) Max. Number of Cuts Required at What Thickness
14. Required Max. Production Speed
15. Is Quick Tool Change Required?
16. Entry Crop Shear (Yes or No)
17. Exit Crop Shear (Yes or No)
18. Corrective Straightener (Yes or No)
19. Scrap Baler? Choppers? Winders? (Specify)
20. Planned Annual Line Production
21. Voltage
22. BUDGET
Thank you.
We offer quality Slitting Lines both new and used / re-manufactured for Aluminium, Coated, Cold Rolled, Copper, Galvanized, Hot Rolled, Prepaint, Silicon, Stainless, Tinplate,
Your enquiries welcome for also individual Line Parts like: Decoilers, Recoilers,
Slitters, Strip Tension Stands, Turnstiles, Upenders ...