![Slitting lines SLL Slitting Line NOVASTILMEC Used [#3268]](Slitting-lines-SLL_Slitter-Novastilmec-IMG_0369-0.jpg "Slitting lines SLL Slitting Line NOVASTILMEC Used [#3268] Slitting lines SLL")
SOLD
1
Used Slitting Line
1950mm x 4mm
NOVASTILMEC
Year when built: 1996
A Quick Tool Change Slitting Line
1950mm x 4mm
290m / min
25 t Decoiler/Recoiler
- minimum material thickness: .4mm
- max 4 cuts at thickness: 4mm
Materials the line has, mostly been processing:
cold rolled, coated, pickled
Line dimensions: 26m x 16m
Line direction: right to left
DECOILER
COIL I.D. 508/608/710mm
COIL O.D. MAX. 2000mm
RECOILER
COIL I.D. 508mm
COIL O.D. MAX. 1800mm
SLITTER
SHAFT DIAMETER 220mm
TENSION 380 V
ELECTROVALVES DC 110 V
HYDRAULIC PRESSURE ~ 140 BAR
PNEUMATIC PRESSURE 6 BAR
DRIVES ERCA
PLC SIEMENS S5
Decoiler D.C. MOTOR 18Kw + 18Kw
Slitter D.C. MOTOR 115Kw
Tension Unit D.C. MOTOR 75Kw
Recoiler D.C. MOTOR 97Kw
Solenoid Valves Vickers
Pneumatic cylinders Camozzi
Hydraulic cylinders Arco
EQUIPMENT LIST
• COIL LOADING CAR - “ L” type
• DOUBLE EXP. MANDREL DECOILER
• MOTORIZED SNUBBER ROLL
• ENTRY TABLE
• MOTORIZED PINCH ROLLS
• SIDE-GUIDE UNIT
• SLITTER
• 4-ARM AUTO. SLITTER LOADER
• SCRAP BALER
• ENTRY RAMP (ROLLS)
• SYNCRONIZATION PIT
• MOBILE STRIP TENSION UNIT WITH:
- EXIT RAMP (ROLLS)
- “ S” TENSIONING SYSTEM
- FELT-TYPE PRESS
- RUBBER COATED ROLLS
- SEPARATOR HOLDING SHAFT
- CROP SHEAR
- EXIT TABLE
• RECOILER WITH SEPARATOR ARM & COIL EJECTOR
• COIL OFF-LOADING CAR
• 4-ARM TURNSTILE, MOTORIZED
• ELECTRICAL CABINET
• CONTROL DESK
• HYDRAULIC POWER PACK
• USED SLITTER TOOLING SET
^ DETAILS
Coil car “L” type :
with
- Hydraulic cylinder for up/down movements
- Hydraulic motor for translation on wheels
Decoiler :
- Max. load capacity 25 t
- Hydraulic hold-down with motorized roll
- Pneumatic emergency-brake
- Hydraulic cylinder for translation
- Side retaining arms
- Automatic centering
- Diameter control
Entry pinch rolls :
with
- Telescopic table
- Rubber coating
- Side guide, driven by hydraulic motor
- Crop shear
Slitter head :
- Penetration of blades by eccentric system, driven by a hydr. geared motorraulic motor.
- Blades ejector (in-out). Locking of blades by automatic hydraulic nuts
- Automatic 4-arm loader
Scrap pit table :
with “telescopic floor”
Strip tension unit :
- Movement of upper roll by screw jacks & hydraulic motor
- Translation by hydraulic geared motor
Recoiler :
with
- “Third point of support”
- Hydraulic ejection plate
Coil off-loading car :
- Hydraulic motor & vertical movements
- Adjustable turnover arms
Turnstile :
- 10 tons each arm
- rotation by hydraulic motor
- mechanical lock
We offer quality Slitting Lines both new and used / re-manufactured for Aluminium, Coated, Cold Rolled, Copper, Galvanized, Hot Rolled, Prepaint, Silicon, Stainless, Tinplate,
Your enquiries welcome for also individual Line Parts like: Decoilers, Recoilers,
Slitters, Strip Tension Stands, Turnstiles, Upenders ...