![Cut To Length Lines CLL Roll Feeder Cut To Length Line FLOREANI & PARTNERS New [#3209]](Cut-To-Length-Lines-CLL_Cut-To-Length-Coil23-main-0.jpg "Cut To Length Lines CLL Roll Feeder Cut To Length Line FLOREANI & PARTNERS New [#3209] Cut To Length Lines CLL")
1
New Roll Feeder Cut To Length Line
1000mm x 1.5mm S.S., Galv., etc.
FLOREANI & PARTNERS
BUILD TO ORDER CUSTOM DESIGNED
Roll Feeder Cut To Length Line
300 - 1000mm x .4 - 1.5mm / 10 t
Sheet length: 200 - 3500mm
50m / min, 35 sheets / min with length: 1000mm
Accuracy: ± .1mm per-metre
Diagonal: ± .2mm per-metre
Process materials:
Stainless Steel, Electro-Galv. Steel, Aluminized Steel ...
Coil loading car - cap.: 10 t
Decoiler - cap.: 10 t
Tilt peeler station
Auto. edge guide
Pinch rolls & corrective straightener
Hydraulic roll tables
Brushless motor roll feeder
- allows a different quantity of parts to be entered
for each sheet stacker separately
Automatic identification of defective sheets
Mechanical power shear
Three-station sheet stacker with powered entry table
- stack change without line stop
- sheet length: [A] 1000mm + [B] 1000mm + [C] 1500(3500)mm
- stack weight max.: 2 t
- frontal & lateral joggers
- each station comes with its own weighing system
- three powered lateral roll tables off-load stacks and load pallets
- 2nd choice sheets can separately get off-loaded
• In roll feeder lines the material does not stop in the line entry section.
• The shearing action occurs as the material is stopped, after it is fed to a pre-determined length.
Roll feeder lines have been built by us for also high tensile strength materials up to 6mm thick.
We offer Start/Stop, Roll Feeder, Flying Shear, Rotary Shear Cut To Length Lines
both new and used / re-manufactured for: Aluminium, Coated, Cold Rolled, Copper, Galvanized, Hot Rolled,
Prepaint, Silicon, Stainless, Tinplate,Titanium
.
Your enquiries welcome for also individual Line Parts like: Decoilers, Feeders,
Levellers, Sheet Stackers, Straighteners ...
Custom-built equipment needs a special kind of product support... our proposals are detailed with drawings and photos to provide clients with a full understanding of the type and quality of the equipment we offer. We send customers approval drawings with dimensions, performance specs and features before the machine is built.
We are experienced at making our products safe, reliable and in conformance with the safety and design standards. Products are designed for maximum serviceability and reliability.
Parts Books are shipped with each piece of equipment. They contain detailed information about installation, inspection and maintenance procedures, component parts.