SOLD
1
Used Slitting Line
1524mm x 3.4mm
CINCINNATI FORTE
A Quick Tool Change Slitting Line
(Removable Head Slitter Type)
18 t
120m / min
Mode of Operation: Driven and Pull through
Materials: HRS, CRS, Alum.
Max. Coil Width (Entry): 60”
Min. Coil Width (Entry): 12”
Thickness Range: .015 - .135”
Max. Coil Weight: 40,000#
Max. Tensile: 50,000 PSI
Max. Yield: 50,000 PSI
Coil I.D. (Entry): 19 - 24”
Coil I.D. (Exit): 20”
Max. Coil O.D.: 72”
Line Direction: Right to Left
Mode of Operation: Driven and Pull through
Line Speed: 0- 400 FPM (Bare-drum)
EQUIPMENT LIST
Uncoiler
Single Mandrel Type
Hydraulic Expansion
Hold Down with Powered Snubber Roll
Wichita Water Cooled Brake
Slide Base
Hydraulic Feed-up Drive
Water Cooler for Brake
Entry Unit
Extending Blade Type Peeler
Mechanical Edge Guide
Powered Entry Pinch Rolls
Powered Entry Centering Guides
Crop Shear, Down-cut with Single Rake
Stationary Slitter Base
75HP D.C. Motor
Two (2) Removable Slitter Heads
Crane Removable
7" Diameter Arbors
Powered Top Arbor Adjust
Adjustable Outboard Housing for Slitting Widths from 48- 60"
Powered Outboard Retraction
Pit Table
Tension Stand- Bronx
Drag Type with Air Bladder
Side Opening
Separator Arm
Recoiler
Hydraulic Push-off
Hydraulic Expansion and Gripper
250HP DC Motor
Overarm Separator
Exit Turnstile
Four (4) arms x 40,000# each arm
Slotted for C-hooks
Powered Rotation
Powered Push-off
Two (2) Scrap Winders on Common Base
Hydraulically Powered
Level Wind
Manual Scrap Dump
Electrical Controls
Main Operators Control Panel
Auxiliary Operators Stations
AC & DC Control Cabinets
Baldor DC Drives
NO Slitter Tooling
All knives, rubbers, steel spacers, shims and separator tooling to be provided by customer
Hydraulic Power Units
We offer quality Slitting Lines both new and used / re-manufactured for Aluminium, Coated, Cold Rolled, Copper, Galvanized, Hot Rolled, Prepaint, Silicon, Stainless, Tinplate,
Your enquiries welcome for also individual Line Parts like: Decoilers, Recoilers,
Slitters, Strip Tension Stands, Turnstiles, Upenders ...